Zoeken naar producten

Alles voor lassen | alles voor uw snij- en lastechniek

  • £
  • $
  • CHF
  • DKK
  • NOK
  • SEK
  • PLN

Informatie

Vorige pagina

Bohler Welding Lasdraad rvs gevuld FOXcore 316L T0 en T1

EN ISO 17633-A: T 19 12 3 L R M21 (C1) 3 - T 19 12 3 L P M21 (C1) 1


Terug naar overzicht

Rutile flux-cored wire of T 19 12 3 L R / E316LT0 type for welding of stainless steels such as 1.4435 / 316L. Easy handling and high deposition rate result in high productivity with excellent welding performance and very low spatter formation. Increased travel speeds as well as self-releasing slag with little demand for cleaning and pickling provide considerable savings in time and money. The wire shows good wetting behavior and results in a finely rippled surface pattern. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –120°C to 400°C. The scaling
temperature is approx. 850°C in air. For higher temperatures a niobium-stabilized consumable such as FOXcore 318-T0 is required. For welding in vertical-up and overhead positions, FOXcore 316L-T1 should be preferred.

Rutile flux-cored wire of T 19 12 3 L P / E316LT1 type designed for welding 1.4404, 1.4432 / 316L type stainless steels with good resistance to general, pitting and intergranular corrosion in chloride containing environments. Intended for severe service conditions, e.g. in dilute hot acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4571 / 316Ti for service temperatures not exceeding 400°C. For higher temperatures a niobium-stabilized consumable such as FOXcore 318-T1 is required. The scaling temperature is approximately 850°C in air. FOXcore 316L-T1 has a stronger arc and a faster freezing slag as compared to FOXcore 316L-T0 DG. It is designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical-up and overhead positions. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –120°C to 400°C. For flat and horizontal welding positions, FOXcore 316L-T0 DG may be preferred.

T0 wordt voornamelijk gebruikt voor onder de hand en T1 voor posities.

Prijzen inclusief materiaal toeslag.

Lasdraad rvs gevuld FOXcore 316L T0 Ø 1,2 mm, gewicht 15 kg (alleen bij afhalen te PomWeld)
€ 561,90 incl. btw € 510,62 € 422,00
Bestel
Lasdraad rvs gevuld FOXcore 316L T0 Ø 1,2 mm - per 2 rollen a 15 kg per rol (30kg - 26,63€ per kg)
incl. btw € 966,79 € 799,00
Bestel

 
Lasdraad rvs gevuld FOXcore 316L T1 Ø 0,9 mm, gewicht 12,5 kg (alleen bij afhalen te PomWeld)
€ 655,50 incl. btw € 595,32 € 492,00
Bestel
Lasdraad rvs gevuld FOXcore 316L T1 Ø 0,9 mm - per 2 rollen a 12,5 kg per rol (25kg - 37,48€ per kg)
incl. btw € 1133,77 € 937,00
Bestel

 
Lasdraad rvs gevuld FOXcore 316L T1 Ø 1,2 mm, gewicht 15 kg (alleen bij afhalen te PomWeld)
€ 540,60 incl. btw € 491,26 € 406,00
Bestel
Lasdraad rvs gevuld FOXcore 316L T1 Ø 1,2 mm - per 2 rollen a 15 kg per rol (30kg - 26,20€ per kg)
incl. btw € 951,06 € 786,00
Bestel
Vorige pagina

Tenzij anders vermeld zijn alle op de website vernoemde prijzen exclusief 21% BTW

3% extra korting op alles!

Alleen voor onze webshop bezoekers nu 3% extra korting op alles!

3% extra korting op alles in onze webshop. Ook op alle aanbiedingen en bulk acties!

Gebruik de couponcode AVLEK321 bij het afrekenen in het winkelmandje.

Deze actie is alleen van toepassing indien meteen in de webshop wordt afgerekend.